[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Josh Able: puny fuel injectors



and Scott, ATP has a "stage" 3 turbo set up that's basically like mine, and
they run about 270hp to the wheels. I have a few more upgrades, and a
slightly different turbo, so I get a bit more.

If I wanted to work at getting closer to 325hp at the wheels, I would need
to go 425cc or so.


Josh Able

----- Original Message -----
From: "Josh Able" <mkii@nycap.rr.com>
To: "ATS - Patrick Bureau" <pbureau@attbi.com>; <scirocco-l@scirocco.org>
Sent: Tuesday, June 11, 2002 12:55 PM
Subject: Re: Josh Able: puny fuel injectors


> http://users.tunerswanted.org/JoshmkII/dyno.jpg
>
>
> Josh Able
>
> ----- Original Message -----
> From: "ATS - Patrick Bureau" <pbureau@attbi.com>
> To: "Josh Able" <mkii@nycap.rr.com>; <scirocco-l@scirocco.org>
> Sent: Tuesday, June 11, 2002 12:51 PM
> Subject: RE: Josh Able: puny fuel injectors
>
>
> > post it :)
> >
> > ==========================================
> > ATS - Patrick Bureau
> > 1985 8v **Planning 3A/JH  Upgrade**
> > 1988 16v ** FOR SALE : 1000.00$ **
> > Web Site : http://longcoeur.com/scirocco
> >
> >
> > =>-----Original Message-----
> > =>From: scirocco-l-admin@scirocco.org
> > =>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Josh Able
> > =>Sent: Tuesday, June 11, 2002 11:38 AM
> > =>To: scirocco-l@scirocco.org
> > =>Subject: Re: Josh Able: puny fuel injectors
> > =>
> > =>
> > =>and I have the chart to prove it. :P
> > =>
> > =>
> > =>Josh Able
> > =>
> > =>----- Original Message -----
> > =>From: "ATS - Patrick Bureau" <pbureau@attbi.com>
> > =>To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
> > =>Sent: Tuesday, June 11, 2002 12:34 PM
> > =>Subject: RE: Josh Able: puny fuel injectors
> > =>
> > =>
> > =>> Yanno, talk is cheap, Dyno Chart speaks by themselves .. (GRIN)
> > =>> No I am not doubting what anyone is saying here...
> > =>> Just wanted to throw 2 cents in the argument...
> > =>> it's a canadian thing... don't worry about it. :)
> > =>>
> > =>> ==========================================
> > =>> ATS - Patrick Bureau
> > =>> 1985 8v **Planning 3A/JH  Upgrade**
> > =>> 1988 16v ** FOR SALE : 1000.00$ **
> > =>> Web Site : http://longcoeur.com/scirocco
> > =>>
> > =>>
> > =>> =>-----Original Message-----
> > =>> =>From: scirocco-l-admin@scirocco.org
> > =>> =>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Josh Able
> > =>> =>Sent: Tuesday, June 11, 2002 11:22 AM
> > =>> =>To: Scott F. Williams
> > =>> =>Cc: scirocco-l@scirocco.org
> > =>> =>Subject: Re: Josh Able: puny fuel injectors
> > =>> =>
> > =>> =>
> > =>> =>
> > =>> =>31 pound = 310cc
> > =>> =>running at about 75% duty cycle
> > =>> =>
> > =>> =>trust me Scott, other shops that sell full kits use these and
> > =>> =>produce 350ish
> > =>> =>hp.
> > =>> =>
> > =>> =>
> > =>> =>These are larger than stock.
> > =>> =>
> > =>> =>
> > =>> =>
> > =>> =>Josh Able
> > =>> =>
> > =>> =>----- Original Message -----
> > =>> =>From: "Scott F. Williams" <sfwilliams@comcast.net>
> > =>> =>To: "Josh Able" <mkii@nycap.rr.com>
> > =>> =>Cc: "Scirocco List" <scirocco-l@scirocco.org>
> > =>> =>Sent: Monday, June 10, 2002 11:48 PM
> > =>> =>Subject: RE: Josh Able: puny fuel injectors
> > =>> =>
> > =>> =>
> > =>> =>> > nope, even 20v turbos pushing closer to 375hp use 310 many
> times,
> > =>> =>anything
> > =>> =>> > they tend to run to rich.
> > =>> =>>
> > =>> =>> My man, this is 100% *impossible*. Way more gasoline is
> > =>needed to make
> > =>> =>that
> > =>> =>> kind of power. This isn't even an engine capability
> > =>discussion. We're
> > =>> =>> talking about the amount of chemical energy stored in a given
> volume
> > =>of
> > =>> =>> gasoline. There's only but so much in there! Like I said
> > =>> =>before, there are
> > =>> =>> three ways to flow more fuel:
> > =>> =>>
> > =>> =>> a) increase the fuel pressure
> > =>> =>> In order to make 297hp at the wheels, you'd have to run a fuel
> > =>> =>pressure of
> > =>> =>> 185psi. This is about 4x the stock amount. Not only would this
> burst
> > =>the
> > =>> =>> fuel lines, it would blow the fuel pressure regulator to bits,
> > =>> =>destroy the
> > =>> =>> injectors immediately, and would completely overwhelm the engine
> > =>> =>management
> > =>> =>> system.
> > =>> =>>
> > =>> =>> b) leave the injectors on longer
> > =>> =>> The injectors can only flow their maximum rated amount of fuel.
In
> > =>your
> > =>> =>> stated case that is 310cc/minute at full duty cycle.
> > =>However, the ECU
> > =>> =>pulses
> > =>> =>> them on/off at anything less than full load. That is how you get
a
> > =>> =>variable
> > =>> =>> amount of fuel delivery. Figure at idle they might be running at
> 5%
> > =>duty
> > =>> =>> cycle. Running them at maximum flow (non-pulsed)is 100% duty
> cycle.
> > =>> =>However,
> > =>> =>> the maximum safe duty cycle is 80%. Pushing the injectors
> > =>beyond this
> > =>> =>point
> > =>> =>> for a prolonged period of time will destroy them.
> > =>> =>>
> > =>> =>> To make the point clear, in order to deliver enough fuel at a
> > =>> =>*dangerous*
> > =>> =>> 100% duty cycle (at 50.75psi fuel pressure) you'd need to run
> 480cc
> > =>> =>> injectors! Those 310cc pee shooters would be overwhelmed at
> > =>> =>just 210hp! In
> > =>> =>> fact, with that math considered, it sounds like the 310cc are
> > =>> =>the engine's
> > =>> =>> *stock* injectors.
> > =>> =>>
> > =>> =>> c) install bigger injectors
> > =>> =>> If you're following me so far, you'll understand why what
> > =>> =>you're claiming
> > =>> =>> isn't feasible in the slightest.
> > =>> =>>
> > =>> =>> > hm..31 pound injectors do = 310cc right?
> > =>> =>>
> > =>> =>> Er... *no*. The conversion is actually 10.5:1. That is, 1lb/hour
=
> > =>> =>> 10.5cc/min. So, if you've really got .31 pound injectors, then
> > =>> =>the metric
> > =>> =>> flow rating is really 3.25cc. Now *that* really is far fetched!
> :^)
> > =>> =>>
> > =>> =>> Seriously, man. You need to go back to your builder and demand
> > =>accurate
> > =>> =>> information. Little injectors like that are simply incapable of
> > =>flowing
> > =>> =>> enough gas to produce the horsepower that they've sold you on. I
> > =>totally
> > =>> =>> believe that your engine can make that level of power. However,
> the
> > =>> =>> injectors aren't up to the task. You've either got erroneous
> > =>> =>flow capacity
> > =>> =>> information or you're making a lot less power then you think.
> > =>> =>>
> > =>> =>> I'm not busting your balls, of course. These are the inflexible
> laws
> > =>of
> > =>> =>> physics and thermodynamics that we're playing with here!
> > =>> =>>
> > =>> =>> P.S. If you're injectors are grossly undersized, you will blow
the
> > =>thing
> > =>> =>to
> > =>> =>> smithereens in short order. You *must* do the research to
> > =>ensure that
> > =>> =>you've
> > =>> =>> got a safe combination. Do it in the name of science, paranoia,
or
> > =>> =>whatever.
> > =>> =>> Just do it and do it right away.
> > =>> =>> --
> > =>> =>> Scott F. Williams
> > =>> =>> NJ Scirocco nut
> > =>> =>> '99 Subaru Impreza 2.5 RS
> > =>> =>> Mazda 323 GTX turbo "assaulted" vehicle
> > =>> =>> Golf GTI 16v "rollycar"
> > =>> =>> ClubVAC: "Roads found. Drivers wanted."
> > =>> =>>
> > =>> =>>
> > =>> =>>
> > =>> =>> _______________________________________________
> > =>> =>> Scirocco-l mailing list
> > =>> =>> Scirocco-l@scirocco.org
> > =>> =>> http://neubayern.net/mailman/listinfo/scirocco-l
> > =>> =>>
> > =>> =>
> > =>> =>
> > =>> =>_______________________________________________
> > =>> =>Scirocco-l mailing list
> > =>> =>Scirocco-l@scirocco.org
> > =>> =>http://neubayern.net/mailman/listinfo/scirocco-l
> > =>> =>
> > =>>
> > =>>
> > =>> _______________________________________________
> > =>> Scirocco-l mailing list
> > =>> Scirocco-l@scirocco.org
> > =>> http://neubayern.net/mailman/listinfo/scirocco-l
> > =>>
> > =>
> > =>
> > =>_______________________________________________
> > =>Scirocco-l mailing list
> > =>Scirocco-l@scirocco.org
> > =>http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>