ACK! Pistons reversed!

[jp43044@netzero.net (jp43044)]

Well, if it's a Zero Gap set I would say go ahead and rotate but make sure
there is plenty of  lubricant on the cylinders.
Erik
88 16V
88 Golf (Urban Insult Vehichle)
----- Original Message -----
From: <joshhignight@techography.net>
To: Scirocco List <scirocco-l@scirocco.org>
Sent: Tuesday, July 02, 2002 5:29 PM
Subject: RE: Re: ACK! Pistons reversed!


> Rings are Total Seal(r), so I don't think I need to worry about the gaps
lining up :)
>
> As for the slots in the pistons, the ones on the stock block are correct
(on the intake side) the ones on the beast block are wrong (on the exhaust
side).
>
> So, given that I've got Total Seal(r) rings, anyone know if I can jsut
spin the piston/rod combo while their still in the block or not?
>
> Joshua
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>

-------------------------------------------
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today! www.netzerolongdistance.com