[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
intake manifold coatings. outcome
After checking numerous outlets for performance, autobody, and supply
parts houses I found DA shiat! Ceramic in a can that acctually
dissipates heat from the manifold. You can get it at Nappa, and it's
relativly inexpensive 4-5 per can. It took me 4 cans to do the intake
of a V8- so a scirocco should get by with one can for several coatings.
Remember to degrease WELL, or get pocking.
This stuff works great coated well, is tough once dry, and looks Sweet!
I think it's a Krylon formulation. suatable up to 1200 degrees for
limited periods, or 500 constant. The manufacturer even claims Dyno
improvements with the product. Personally, I only used it as a
functional aesthetic. I didnt want a coating that could possible inhibit
the dissipation of heat!
T'care all!
Mike blain (bad speller)
Larry wrote:
> Just let me say this; POWDER COAT.
>
> Larry sandiego16V
>
>
>>OK, here is a question: aside from the obvious thing to do which is
>>send my manifold pieces out to JETHOT, is there a CHEAPASS thermal
>>coating or spraypaint type coating for intakes out there?
>>
>
>
> ----------------------------------------------------
> Sign Up for NetZero Platinum Today
> Only $9.95 per month!
> http://my.netzero.net/s/signup?r=platinum&refcd=PT97
>
>
>