[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

G60 green top injector flow rates?



I think what he meant was that if the injector has an o-ring at both ends
they are interchangeable. Bosch also makes an injector that has a barb
fitting to accomodate a fuel hose. That obviously is not interchangeable.
Dan

----- Original Message -----
From: Wing Gee <winggee@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Sunday, February 17, 2002 5:10 AM
Subject: Re: G60 green top injector flow rates?


> for any bosch injector? strange. i went to the yard today and got some
bosch
> injectors off a mercury cougar, it is throttle body injection. I'll take
> some pics in the morning.  but when you compare the injectors with my
stock
> g60 ones, they look differant.
>
> the injectors are rated at something like 63hp each. some 300cc.. very
very
> close the saab turbo one that was mentioned earlier. the injectors are in
my
> car and i'm just too lazy to get them right now.
>
> Wing
> ----- Original Message -----
> From: "Scott F. Williams" <sfwilliams@home.com>
> To: "Allyn" <amalventano1@comcast.net>; "Wing Gee" <winggee@hotmail.com>;
> <jester@westfailure.net>; "Dan Bubb" <jdbubb@ix.netcom.com>
> Cc: <scirocco-l@scirocco.org>
> Sent: Saturday, February 16, 2002 1:18 PM
> Subject: RE: G60 green top injector flow rates?
>
>
> > You'll simply need to swap over to Digifart injector seats. So, they're
> > essentially a plug in switch over. -a no-brainer. The same is true of
any
> > Bosch fuel injector.
> > --
> > Scott F. Williams
> > NJ Scirocco nut
> > '99 Subaru Impreza 2.5 RS
> > Mazda 323 GTX turbo "assaulted" vehicle
> > Golf GTI 16v "rollycar"
> > ClubVAC: "Roads found. Drivers wanted."
> >
> > Check out our rally team's website!
> > http://www.usrallyteam.com
> >
> > > -----Original Message-----
> > > From: Allyn [mailto:amalventano1@comcast.net]
> > > Sent: Saturday, February 16, 2002 4:12 PM
> > > To: Scott F. Williams; Wing Gee; jester@westfailure.net; Dan Bubb
> > > Cc: scirocco-l@scirocco.org
> > > Subject: Re: G60 green top injector flow rates?
> > >
> > >
> > > Scott,
> > > Can those eclipse injectors 'plug in'? or do we need special adapters?
> > > Al
> > >
> > > ----- Original Message -----
> > > From: "Scott F. Williams" <sfwilliams@home.com>
> > > To: "Wing Gee" <winggee@hotmail.com>; <jester@westfailure.net>;
> > > "Dan Bubb" <jdbubb@ix.netcom.com>
> > > Cc: <scirocco-l@scirocco.org>
> > > Sent: Saturday, February 16, 2002 4:00 PM
> > > Subject: RE: G60 green top injector flow rates?
> > >
> > >
> > > > Wing, I'm not sure about your exact requirements, but if you need
> 300cc
> > > > injectors, the units out of a Ford Thunderbird Supercoupe will
> > > do ya. Or, if
> > > > you need something bigger, the Eclipse turbo injectors supply
> > > about 440cc.
> > > > Just keep in mind that the Eclipse injectors are low impedence.
> > > You might
> > > > have to run inline resistors depending on your EMS' needs.
> > > > --
> > > > Scott F. Williams
> > > > NJ Scirocco nut
> > > > '99 Subaru Impreza 2.5 RS
> > > > Mazda 323 GTX turbo "assaulted" vehicle
> > > > Golf GTI 16v "rollycar"
> > > > ClubVAC: "Roads found. Drivers wanted."
> > > >
> > > > Check out our rally team's website!
> > > > http://www.usrallyteam.com
> > > >
> > > > > -----Original Message-----
> > > > > From: scirocco-l-admin@scirocco.org
> > > > > [mailto:scirocco-l-admin@scirocco.org]On Behalf Of Wing Gee
> > > > > Sent: Saturday, February 16, 2002 12:00 PM
> > > > > To: jester@westfailure.net; Dan Bubb
> > > > > Cc: scirocco-l@scirocco.org
> > > > > Subject: Re: G60 green top injector flow rates?
> > > > >
> > > > >
> > > > > Looking through some of the corrado archives..
> > > > >
> > > > > looks like they are 14.5 ohm injectors
> > > > > 260cc/min 26#/hr
> > > > >
> > > > > sounds about right i guess..
> > > > >
> > > > > hrmm... i think their gonna be too small for my application.
> > > > >
> > > > > Thanks!
> > > > > Wing
> > > > >
> > > > > ----- Original Message -----
> > > > > From: <jester@westfailure.net>
> > > > > To: "Dan Bubb" <jdbubb@ix.netcom.com>
> > > > > Cc: "Wing Gee" <winggee@hotmail.com>; <scirocco-l@scirocco.org>
> > > > > Sent: Saturday, February 16, 2002 8:09 AM
> > > > > Subject: Re: G60 green top injector flow rates?
> > > > >
> > > > >
> > > > > > On Sat, 16 Feb 2002, Dan Bubb wrote:
> > > > > >
> > > > > > > 220-240cc/min. In that range. NA 2.0L 8V injector is
> > > about 190cc/min.
> > > > > This
> > > > > > > is just stuff I picked up on Vortex, so I don't know how
> > > reliable the
> > > > > > > numbers are.
> > > > > > This is something i picked up on vortex too.
> > > > > >
> > > > > > http://www.autospeed.com/A_0102/article.html
> > > > > >
> > > > > > Tables of junkyard injector flow rates, lots of 300cc+ min
> > > injectors on
> > > > > > there... like this one...
> > > > > >
> > > > > > Bosch 0 280 155 009 346cc/min Saab Turbo
> > > > > >
> > > > > > if you want more flow take a copy of this with you to the
> > > yard, you'll
> > > > > > find something :)
> > > > > >
> > > > > > peas,
> > > > > >
> > > > > > Steve
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > ******************************************************************
> > > > > *********
> > > > > >              Fashion Twins, activate! form of: a lemming.
> > > > > >                       http://westfailure.org
> > > > > >
> > > > > ******************************************************************
> > > > > *********
> > > > > >
> > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Scirocco-l mailing list
> > > > > Scirocco-l@scirocco.org
> > > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Scirocco-l mailing list
> > > > Scirocco-l@scirocco.org
> > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> >
> >
> >
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l