[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cheapass faster steering ratio idea??



Ron..
even if the swap "fits" hows it gonna increase your rate of steering? the
wheel still has to travel the same distance. even if there is a slight
increase or decrease in the rate of change. its not gonna be the really
quick lock to lock that your are looking for. as the steering rack still
only moves dx for n turns. you want fewer turns than n so the dx is
larger.
Brian
88 16v White.. Got mine replaced finally.. too bad the wife cant know
until its done.. Anybody got white hood and 2 white 16v fenders?
85 8v Free... parts donor for the topless bunny
82 Lipstick Red Topless Bunny -- the wifes car not the wife.


 On Sun, 17 Feb 2002, Ron
Pieper wrote:

> OK...this morning's brainflash, waiting for y'all to applaud or condemn
> it...
>
> Follow me here...
> A2 outer tie rod ends are a bit different than A1's.  They are not
> straight, there is a bend built into them after the female thread.
> Thus, there are left and right A2 outer tie rod ends.  (Sorry I don't
> have a picture).  Installed, the tie rod ends are oriented so that,
> from the top, the extended line of the tie rod passes behind the
> tapered hole in the arm of the hub carrier.  With me so far?
>
> Of course, on A1 cars, this doesn't matter since there is no bend...the
> extended line of the tie rod passes *through* the hole in the hub
> carrier.  This is key, because...
>
> The brainflash is to use A2 outer tie rod ends on our A1 cars...BUT use
> a left tie rod end on the right side, and vice-versa. moving the line
> of the tie rod IN FRONT of the hole in the arm on the hub carrier.
> Thus, the tie rod would apply its force on the hub carrier over a
> smaller arc, effectivley making a quicker ratio.
>
> Sooo...those who are both A1 and A2 conversant (or just brilliant),
> please provide your thoughts on this...I'll try to give it a test soon
> and look at clearancing issues, etc.
>
> Disclaimer: my assumption about A2 tie rod ends is based on some hub
> assemblies I scrounged from Daun...these might have been from his parts
> Passat...I dunno...
>
>
> =====
> Cheapass Ron
> "Victor" '87 16V Scirocco
> "Teufelhasen" '93 Cabby <-For sale
>
> If it ain't foggy, TURN OFF YOUR FOG LIGHTS.
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>