Jetta front Bumper and Corrado Rear Bumper on MKII Scirocco

[flaatr@yahoo.com (EUROROC II)]

do you have pictures of this? I'm interested in this.

-RGK-



At 08:28 PM 2/16/2002 -0500, you wrote:
>Hey guys today I picked up a corrado rear bumper cover thingy and a jetta 
>front bumper.  After removing my rear bumper cover down to the metal 
>actual bumper I test fit it and it fits of coarse but the curves on the 
>bumpercover dont get far enough to get to the MkII scirocco wheel 
>wells.  So I decided if I cut 1" off the metal bumper it will match up 
>perfect.  How can I attach the rear bumper cover to the metal 
>bumper?  Double sided tape?
>
>The front bumper after getting it stripped to the actual metal bumper part 
>was way easyer.  The jetta bumper with turn siganls in it as well as fogs 
>fit perfect with slight mods.  I had to put a shim on it to raise it high 
>enough to reach the front spoiler.  The wheel well curves were too long 
>but after 4 hours with my dremel it fit perfect.  Again how do i secure 
>this?  Can the stock wiring handle the extra power draw from the 2nd turn 
>signal.
>
>Oh man this makes the rocco look so cool and I only spent 150 bucks on 
>both.  Now I just need some side skirts and finish my engine transplant!
>
>Thanks guys,
>
>
>             Tory Brown