G60 green top injector flow rates?

[amalventano1@comcast.net (Allyn)]

Scott,
Can those eclipse injectors 'plug in'? or do we need special adapters?
Al

----- Original Message ----- 
From: "Scott F. Williams" <sfwilliams@home.com>
To: "Wing Gee" <winggee@hotmail.com>; <jester@westfailure.net>; "Dan Bubb" <jdbubb@ix.netcom.com>
Cc: <scirocco-l@scirocco.org>
Sent: Saturday, February 16, 2002 4:00 PM
Subject: RE: G60 green top injector flow rates?


> Wing, I'm not sure about your exact requirements, but if you need 300cc
> injectors, the units out of a Ford Thunderbird Supercoupe will do ya. Or, if
> you need something bigger, the Eclipse turbo injectors supply about 440cc.
> Just keep in mind that the Eclipse injectors are low impedence. You might
> have to run inline resistors depending on your EMS' needs.
> --
> Scott F. Williams
> NJ Scirocco nut
> '99 Subaru Impreza 2.5 RS
> Mazda 323 GTX turbo "assaulted" vehicle
> Golf GTI 16v "rollycar"
> ClubVAC: "Roads found. Drivers wanted."
> 
> Check out our rally team's website!
> http://www.usrallyteam.com
> 
> > -----Original Message-----
> > From: scirocco-l-admin@scirocco.org
> > [mailto:scirocco-l-admin@scirocco.org]On Behalf Of Wing Gee
> > Sent: Saturday, February 16, 2002 12:00 PM
> > To: jester@westfailure.net; Dan Bubb
> > Cc: scirocco-l@scirocco.org
> > Subject: Re: G60 green top injector flow rates?
> >
> >
> > Looking through some of the corrado archives..
> >
> > looks like they are 14.5 ohm injectors
> > 260cc/min 26#/hr
> >
> > sounds about right i guess..
> >
> > hrmm... i think their gonna be too small for my application.
> >
> > Thanks!
> > Wing
> >
> > ----- Original Message -----
> > From: <jester@westfailure.net>
> > To: "Dan Bubb" <jdbubb@ix.netcom.com>
> > Cc: "Wing Gee" <winggee@hotmail.com>; <scirocco-l@scirocco.org>
> > Sent: Saturday, February 16, 2002 8:09 AM
> > Subject: Re: G60 green top injector flow rates?
> >
> >
> > > On Sat, 16 Feb 2002, Dan Bubb wrote:
> > >
> > > > 220-240cc/min. In that range. NA 2.0L 8V injector is about 190cc/min.
> > This
> > > > is just stuff I picked up on Vortex, so I don't know how reliable the
> > > > numbers are.
> > > This is something i picked up on vortex too.
> > >
> > > http://www.autospeed.com/A_0102/article.html
> > >
> > > Tables of junkyard injector flow rates, lots of 300cc+ min injectors on
> > > there... like this one...
> > >
> > > Bosch 0 280 155 009 346cc/min Saab Turbo
> > >
> > > if you want more flow take a copy of this with you to the yard, you'll
> > > find something :)
> > >
> > > peas,
> > >
> > > Steve
> > >
> > >
> > >
> > >
> > ******************************************************************
> > *********
> > >              Fashion Twins, activate! form of: a lemming.
> > >                       http://westfailure.org
> > >
> > ******************************************************************
> > *********
> > >
> > >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l