decent wheel lug/stud combos

[PhilipM3@tiac.net (Philip P. Mueller III)]

> The H&R spacers on the other hand are a disappointment for the
> price. ($60/pr.)
> It is partly my fault assuming the 8mm ones would be hubcentric...they
> aren't :(
> I will probably throw them on E-bay when I get the new ones.
> I am going to be ordering thicker 15mm ones (this is supposedly the
> thinnest size with the hubcentering ring).

Same story here, except I got the 16mm.  Just a flat piece of aluminum
drilled with 9 holes, 4x100, 4x114.5?, & the center hole which is tapered=
,
nothing that any idiot couldn't make without much trouble.  The main prob=
lem
with these is that the hub hole in the wheel is tapered, so by the time y=
ou
space the wheel out 16mm, the wheel no longer engages the hub even the
though the hub still sticks through the spacer.  I had actually considere=
d
trying the 8mm spacer (was just going to make them this time, not wasting
more money), but I'm assuming that you are having the same problems.  I w=
as
highly disappointed, since they were described as hubcentric wheel spacer=
s,
that's the only reason I spent the cash in the first place.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=A0
Philip P. Mueller III
Westbrook, CT - USA
mailto:philipm3@tiac.net
http://www.p3racing.net
=A0
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D