High Performance Hose and Hose Ends [was Re: EFI question -fuel fittings]

[vze28h54@verizon.net (Chris)]

For everything in High Performance Hose and Hose Ends go to  Earl's 
Performance Products  or someone who carries their line. They are the High 
Priests for this type of product.

http://www.earlsperformance.com/html/

Chris (one of many on this list)
VA

At 02:20 PM 04/11/2002 -0700, Joe Doty wrote:

>Chris,
>
>Since my funds were low I ended up using the existing filter and all 
>barbed fittings up to the filter and rail.  Aeroquip makes a nice 250 psi 
>hose for about $2/ft in 1/4" ID.  What you could do is find another return 
>line from any mk2 rocco (since its barbed) and use it.  If you need to get 
>fittings for it, you can go to your local hydraulic hose supply company 
>and they will probably help you out.  I ended finding an Aeroquip reseller 
>30 mi away from me, the guys there hooked me up with all the fittings I needed.
>
>Joe
>
>>Hi all,
>>   I'm putting my EFI project together and I need to know how you EFI guys
>>and gals hooked hooked up to the existing fuel lines.  The filter and fpr
>>I'm using have 6an fittings and I can't seem to figure out what kind of
>>fitting that is hanging off the end of the fuel supply and return lines.
>>Also, can I hang my fpr on the engine or will vibration and heat be too much
>>for it?  I'm using an aeromotive regulator.  TIA....
>
>
>_________________________________________________________________
>Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l