Re: problems cont (long)

[Shawn C Meze <skerocdriver@juno.com>]

On Sun, 16 Sep 2001 18:08:26 -0700 "Joe Doty" <rocco2nr@hotmail.com>
writes:
>Michael,
>
>When the engine is not running, it is easier to shift the gears, but 
>not as 
>easy as it should be.  I guess I should have mentioned that.  If I put 
>it in 
>gear, put the clutch in, and start the car, it moves forward a little.



Disregard my previous post. (about 2 min ago...) 

I feel its got to be the clutch. More specific, probably the flywheel
wasnt cut properly. More specific to that, they machined the clutch PP
mating surface of the flywheel but not the clutch surface the same if at
all. This would allow the clutch to not fully disengage causing the
clutch to drag as you described. 

Make sense? 


Shawn Méze
86' Jetta GLi 8V       84' Scirocco 8V           88' Corvette -SS 30-
82' Scirocco GTi -FSP 54-     79' "Project FSP Scirocco"
The Fastest, Quickest, Cleanest and best looking Scirocco in all of San
Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org