Re: Removing steering rod end From HUB

["MrAudi" <mraudi25@epix.net>]

um, a hammer usually works pretty well too. turn the wheel so the rod is out
as far as possible. then whack the hub where the rod goes thru, after a few
hits it will pop right out.
----- Original Message -----
From: "T Berk" <tberk@mindspring.com>
To: "Scirocco List" <scirocco-l@scirocco.org>
Sent: Friday, November 30, 2001 3:16 PM
Subject: Removing steering rod end From HUB


>
>
> Do I really need one of those 'pickle forks"? Or is there another way?
>
> Car in question is an A2 GTI to Jetta hub swap but eventually I will be
> replacing the ends on the Roc too so any help, technique would be
> helpful.
>
> TBerk
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org