RE: Porsche 944T Master Cylinder on 81 Scirocco MS for 16V brakes.

["Neal Tovsen" <sixteen.volt@verizon.net>]

OOOhhh. That could be fun!

Is there any way to have an adj. prop. valve on a standard MC? I've been
kinda wondering about that...

Neal

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of Randy B
> Sent: Friday, November 09, 2001 12:59 AM
> To: scirocco-l@scirocco.org
> Subject: Porsche 944T Master Cylinder on 81 Scirocco MS for
> 16V brakes.
>
>
>
> Ya'all been wondering why I am posting so often now????
> Ok, I have recently been laid off.
> Idle minds are the hands of......(How did this end?)
>
> Anyways while I've been lounging around watchin' soaps and
> CNN I have also
> been thinking about future mods. (once I get a job again that is).
>
> I have test fit a 944 Porsche Turbo MS to the stock 81
> Scirocco booster and
> it is a direct fit.
> This MS is 23mm for front and 20mm for rear.
> 2 line outputs for the front and 1 line output for the rear.
> I hope to run the single line through the firewall to the
> E-brake location
> and mount a Tilton adj. proportioning valve (one line in, two
> line out), and
> then run the dual lines back to the rear calipers.
> This MS compared to the 81 Scirocco MS which is 20mm for both.
> I am going to try this MS with my 16V brakes (currently running stock
> MS/Booster with 10.1/8.9 with pedal to the floor).
>
> I'll let ya'll know how this turns out in a future episode of
> the Young and
> the Restless......OOps, damn TV......
>
> Randy
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org