Re: power lock installation

["Mr.Eddy" <eperson@students.uiuc.edu>]

thanks, but i got the actuator in tonite and its working fine, fits in
right below the stock vacuum actuator.  had to fab a new linkage rod from
the stock actuator but it should be fine now, just gotta finish hooking up
the rest of the alarm this weekend.

Eric

At 01:10 AM 5/18/01 -0400, Allyn wrote:
>central locking? wire that alarm into the central locking system, no need
>for actuators. you must only trick the system into thinking that you are
>locking the driver door, it will do the rest.
>al
>
>----- Original Message -----
>From: "Mr.Eddy" <eperson@students.uiuc.edu>
>To: <scirocco-l@scirocco.org>
>Sent: Tuesday, May 15, 2001 7:45 PM
>Subject: power lock installation
>
>
>> To anyone that has installed their own alarm/power locks:
>>
>> where and how did you mount the door lock actuator in the drivers door.
>> Space seems to be limited and i am not seeing a great spot for it offhand.
>> Also, how did you attach the pull rod to actuate the existing lock
>> mechanism.  There looks to be an extra hole near the original actuator,
>and
>> there is also possibly a place up higher at the pivot from the lock
>button.
>>
>> btw, this is a 16v with central locking.
>>
>>
>>
>> --
>> Email LIST problems to: scirocco-l-probs@scirocco.org.
>> To unsubscibe send "unsubscribe scirocco-l" in the message to
>majordomo@scirocco.org
>>
>>
>
>

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org