Re: mk1 Master cylinder and brake options

["Patrick Bureau (aka: Patric de Long Coeur)" <patricdlc@hotmail.com>]

as far as I know ( and gawd knows my knoledge is limited so no bashing the 
frenchman here)..

the 8v and 16v (post 85') dont use a brake light sender at the master 
cylinder (well mine doesnt) the sender is on the brake pedal assembly.

if you want I could print a page of etka and scan it for ya.
what year assembly is the pedal cluster from?

Patrick


----Original Message Follows----
From: Gary Huff <scirocco86@home.com>
To: scirocco-l@scirocco.org
CC: mgyip@yahoo.com
Subject: mk1 Master cylinder and brake options
Date: Tue, 19 Jun 2001 15:39:37 -0500

So,
	The mk1 taillight switch is off of the master cylinder, something posing a 
bit of a problem since I am going to be using a 16v pedal cluster, 16v 
master cylinder, and 16v brake booster in my car. I know the 16v scirocco 
has the switch on the pedal. Someone else out there has to have done this. I 
ask, is it simple? Simple as wiring up said switch? As far as the 16v Pedal 
cluster, this should be a straight bolt up, correct? I would think it would 
be, plus the 16v cluster has the nifty spring on the clutch pedal. Peace,
		-Gary Huff

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to 
majordomo@scirocco.org


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org