[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: G60 in a scirocco



What cover plate or hole are you referring to? Nobody's mentioned it to me yet,
and I'd like more info if you have it. There is a hole in the block behind where
the passenger mount bolts? Will it only require a simple plate to be made (which
I can easily do myself), or is it a complex shape?

It is always good to have fewer surprises when you get deep into an engine swap!

Neal

-----Original Message-----
From: owner-scirocco-l@scirocco.org
[mailto:owner-scirocco-l@scirocco.org]On Behalf Of Allyn
Sent: Sunday, June 17, 2001 10:45 AM
To: scirocco-l@scirocco.org; derrick flo
Subject: Re: G60 in a scirocco


derrick,
i know you have to make a custon cover plate for a hole on the pass side of the
block. the pass
mount plate wont bolt up with the old cover plate on the motor.
al

----- Original Message -----
From: "derrick flo" <derrickmd19@juno.com>
To: <scirocco-l@scirocco.org>
Sent: Sunday, June 17, 2001 4:31 AM
Subject: G60 in a scirocco


> I'm thinking about putting a G60 motor in a 84 scirocco.  I wanted to
> know if its a direct bolt on or do i have to do a lot of mods to make it
> fit.  had anyone ever done this mod before?
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org