[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: I am an idiot. Please help me.(CV job)
Scott Richardson wrote:
>
> The reason I am such an idiot is because I didn't check the bentley during
> my CV job. I took the inner joints apart without marking anything. So now I
> have no idea how to get them back together. I do have the joints separated
> so at least I know which balls go with which joint, just not which holes
> they go in. Is there anything I can do besides go out and buy all new
> joints? TIA
>
> Scott Richardson
Clean all the old grease out and slap some Redline Bearing grease in.
Can't say I can shed light on which goes were without them in hand, but-
As to buying new ones (this is not too bad an idea) you should get the
rebuild kit at least or go whole hog and get new CVs w/ install it (new
boots & grease & clamps & stuff) from one of the list vendors:
<http://www.parts4vws.com>
<http://www.germanparts.com>
TBerk
--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org