[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: outer cv



>how do you get the outer cv joint off of a 90mm
>axle?  The ones that we have don't seem to have
>the circlip below the washer, and the joint won't
>pound out with a hammer....
>
>
>Alex Ting

Pound the joint off with a hammer, no really. :)  Just
hit it harder.  There's probably a clip retainer
down in the joint on the shaft where you can't see it.
It must be 'defeated' before the joint will move off
the shaft, and the retainer clips are single use only
naturally.

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '92 Passat 16v (Winter+) | - brett@netacc.net

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org