[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Bent Valve, Too High Revs!!



On Thu, 27 Dec 2001, S. Coleman wrote:

>     So what I came up with is a small shim on a new, stock VW spring put
> pressure at 90 lbs.   Plus I managed to get all the springs within 2 lbs
> with shimming and after pressure testing and measuring,... I have little
hi,

this intrigues me... How thick of shims did you use (on average) and did
you haeva cheap valve sprign tester or access to a well founded shop or
???

thanks,

Steve

***************************************************************************
             Fashion Twins, activate! form of: a lemming.          
                      http://westfailure.org
*************************************************************************** 


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org