[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pressure plate info



On Fri, 7 Dec 2001 18:01:36 -0500 "Dan-the-man" <danws69@earthlink.net>
writes:
> ok, I just went through this exact situation with Peter a few weeks 
> ago....
> 
> I have an FF tranny mounted to a 16v engine.
> 
> I had the 8v setup all the way, i.e. clutch, PP, and flywheel.
> 
> To 'upgrade' to the Satch combo, just get a 16v flywheel and you're 
> good to go. The Satch kit WILL NOT fit inside the smaller 8v flywheel.
I 
> think the diameter on the PP surface area is 8.5" (for the 16v
version).
> 
> 
> HTH
> 
> Dan
> Tam-pa, FL
> '81 Rabbit Sportruck
> '87 16v Scirocco
> '00 Jetta

This is different...

Dan Bubb is thinking that they are supplying an 8V 210mm pressure plate,
as a replacement for a 16V 210mm pressure plate.

You had a 190-200mm flywheel and clutch, (1.5/1.6/1.7), the 1.8L 8V uses
the same flywheel as the 16V (A1 and A2).

Hope that clears it up...

Peter - <http://thescirocco.com> - http://tttuning.com/ , Peloquin LSD,
http://quaifeamerica.com/ , http://www.magnecor.com/ -  
Bear, DE 19701                
'79 Scirocco 16V 25 049
'83 GTI 37 505
'84.5 Scirocco 42 133
'84 GTI 63 348  - SciRollers: '79 70 900, '84 Black, '88 Red - 
http://feedbyte.com ___________DO
NOT!!!____________________________________________

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org