Re: HELP! taking out dash on 16v...

[Robert piwonka <tpiwonka@TTACS.TTU.EDU>]

You have to remove the stering column and the turn and windshield wiper arms
as well as the lower center dash peice (thing that holds radio and stuff)
then when you open the doors there should be three screws you need to
remove.  Open the glove box and there should be a screw to the left that you
have to remove and i think you have to remove the center ac vent to access a
screw or two under it also remove the instrument cluster and i think there
is at least one screw under there.  also the ac tubes there is a little
rubber thing that seals two tubes that you will need to remove.

This is all I remember.

Robert Piwonka


----- Original Message -----
From: "josh Wyte" <josh_wyte@yahoo.com>
To: <scirocco-l@scirocco.org>
Sent: Sunday, December 02, 2001 10:15 AM
Subject: HELP! taking out dash on 16v...


> Ok, so I have the Bentley and it's a very
> straightforward procedure, but what I'm wondering is
> do I have to do everything the Bentley says?
>
> Bear with me, on my A2 Golf the Bentley had me
> practically take apart the entire dash to get the
> instrument cluster out!  When all I needed to do was
> pop off the steering wheel and take off a coupla
> screws.
>
> So before I completely disassemble the rocco like the
> Bentley says, I want to know if I really need to.
>
> Email me or call me at 781-789-2472 if you know.
>
> TIA!
>
> -josh
>
> =====
> Josh Wyte
> Momentum Motorsports
> 508-833-3024 After 5 pm EST
>
> __________________________________________________
> Do You Yahoo!?
> Buy the perfect holiday gifts at Yahoo! Shopping.
> http://shopping.yahoo.com
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org