[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 16v brakes onto '77 questions/ragtop sunroof upolstery?

To: BHonnold <bhonnold@pac-cap.com>
Subject: Re: 16v brakes onto '77 questions/ragtop sunroof upolstery?
From: Dan Bubb <jdbubb@ix.netcom.com>
Date: Tue, 28 Aug 2001 07:30:24 -0400
CC: scirocco list <scirocco-l@scirocco.org>
References: <KDEPILGLNDGGACAEBIHICEANDIAA.bhonnold@pac-cap.com>
Reply-To: jdbubb@ix.netcom.com
Sender: owner-scirocco-l@scirocco.org

Actually, 16V spindles aren't required.
If they were then 90mm outer joints could still be used with the 16V
spindles. So, in either case the original 90mm axles will work.
Dan

BHonnold wrote:
> 

> 
> You will need 16v front spindles as well and unfortunetely this means that
> you go with 100mm dirveshafts and retrofit your current tranny with 100mm
> hubs.
>

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- RE: 16v brakes onto '77 questions/ragtop sunroof upolstery?
  - From: "BHonnold" <bhonnold@pac-cap.com>

Prev by Date: Re: Timing marks yet again - mystery solved?
Next by Date: Re: 16v brakes onto '77 questions/ragtop sunroof upolstery?
Prev by thread: RE: 16v brakes onto '77 questions/ragtop sunroof upolstery?
Next by thread: Re: 16v brakes onto '77 questions/ragtop sunroof upolstery?
Index(es):
- Date
- Thread