Re: tint removal

[SailingFC@aol.com]

scirocco@iglou.com writes:

>Use very fine steel wool (000 or 0000) and start cleaning... spray, scrub,
>spray, scrub...


Be very careful when doing this.  On my '78, the rear window has the 
defroster on the inside surface of the glass.  If you use any sharp or 
abrasive tools on this surface, it will permanently cut/scratch it.  You can 
test the surface by making a small cut at the edge or corner of the glass 
with a sharp knife.  If it leaves a mark, you have a soft surface that is 
easy to damage.  I've never removed tint from this kind of surface, so all I 
can say is be careful.
HTH.

-Dick-
78 Scirocco
Original Owner
http://member.aol.com/sailingfc/