Re: MOTOR MOUNT QUESTION

[mike <rept@uswest.net>]

I just did it-   piece of cake.

17 mm socket-
hex  socket-
an extension -

use a floor jack to lift the motor just barely- loosen the mount bracket bolts
with the 17mm socket (2 bolts).
use the extended hex nut to loosen the starter bolts (holds the rear of the
bracket).
the whole piece will come out.
Pull off the old  and use a vise to hold the bracket and a rubber mallet to
POUND the new one on.

It's real easy.

Accidi2000@aol.com wrote:

> does anyone know if it would be possible to replace the front motor mount by
> my self , and whats involved, thanks
>
> Aaron carter
> 88 scirocco 16V
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org