[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: regrinds/ euro intake cam??



Yes, this is actually common for a "modified" 16v to have 
this dip in torque... a stock 16v has no dip at all...just
a nice smooth curve.  Kinda disappointing that when you 
gain top end, that there is a loss early on...  : (
My only guess for this loss would be my euro cam...?

Yes, I have a stock downpipe w/ TT 2.25'' w/ a superturbo
muffler.  I also have a lightened flywheel...

Ben

--- Anthony Pelletier <vwnuts@yahoo.com> wrote:
> I just checked out Ben's dyno:  Nice power for a 1.8. 
> I noticed something that I have seen on all the 16v
> dyno's.  They all have a dip in the power just after
> 3K.  Is there a logical reason for this.  That is kind
> of a bad place to have a "dip" as thats were most of
> us cruise at.  
> 
> btw Ben, you had a tt cat back. and (race dp?  magna
> flow muffler).  
> 
> Tony
> 
> 
> 
> Harder <vwtype53@yahoo.com> wrote:
> > I had my intake cam reground by a place called Delta
> > Camshafts
> > in Tacoma, WA.  Not local for me...I had to take out
> > the cam
> > and mail it to them.  Even with their fast turn
> > around time, it
> > still was a good couple weeks by the time I got it
> > back.
> > Time wasn't an issue in my case since the car was
> > parked for the
> > winter anyhow...
> > 
> > I just had my car on the dyno, so you can see what
> > it has done
> > for me... 
> > 
> > <http://www.geocities.com/harderb/ben-dyno1.jpg>
> > 
> > Basically, the intake cam (with an upgraded exhaust)
> > will give about
> > 10 hp on the top end with little change in torque...
> > 
> > HTH
> > 
> > Ben
> > 
> > --- Anthony Pelletier <vwnuts@yahoo.com> wrote:
> > > Hi everyone,
> > > 
> > > I have to do a valve cover gasket on my 16v.  I
> > > remembered that there was someone on the list that
> > > said they had good luck with the eurocam regrinds
> > from
> > > a place that was local to them.  If I remember
> > > correctly they were cheap too like $80 or
> > something...
> > >  OR does someone have one they would like to sell?
> > 
> > > Just looking to upgrade (as always).  I figure
> > this
> > > car is already dragging me in the hole why not go
> > all
> > > out.  thanks for any info
> > > 
> > > Tony
> > 
> > 
> > =====
> > ____________________________________
> > Benjamin Harder
> > 86 Scirocco 16v
> > 81 Scirocco
> > http://members.nbci.com/Scirocco16v/
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > From homework help to love advice, Yahoo! Experts
> > has your answer.
> > http://experts.yahoo.com/
> 
> 
> __________________________________________________
> Do You Yahoo!?
> From homework help to love advice, Yahoo! Experts has your answer.
> http://experts.yahoo.com/
> 
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe
> send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 


__________________________________________________
Do You Yahoo!?
>From homework help to love advice, Yahoo! Experts has your answer.
http://experts.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org