[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cleaning Carbon from Pistons




> >How would I clean up all the carbon deposits which have accumulated on
> >the pistons of my 16V. I have the engine apart and I was thinking
> >about using Varsol or even brake cleaner. Any other suggestions?
> >
> >Thanks
>
>
>A wire wheel works great.


So you would use a wire wheel on a piston? This is pretty scary Shawn. Not 
only does a wire wheel rapidly remove aluminum from its self contained 
structure but it also can cause scoring (BAD). I would NEVER use a wire 
wheel on a piston. Soak it in very toxic, noxious carb clean and break a 
used ring in half and grind a point on it to scrape the carbon from the ring 
grooves. This works well. Just remember to use a rag or something on your 
thumb when you do this or you will be angry at your thumb for awhile. HTH


Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V Rag (Scirocco of course)
'80 Rocco (new!)
'78 Scirocco
'82 GLI
'80 'Vert
'65 Bus (ugly, but good for campin' W/toaster oven)
'61 17 Window


________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org