[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Front motor mount



Loosen up the starter bolts and remove the bracket.  Be careful not too strip 
the starter bolts (torx bolt I believe).  I replaced those with generic hex 
head bolts....seems ok!  Put a jack under the oil pan just to relieve tension 
from the mount.

hope that helps
Joe Maahs

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org