Re: Brake question

["dale witt" <dalewitt@express-news.net>]

Must be too early for me to respond to questions.  I was speaking of the
spindles when I mentioned that they are stronger than the Sciroccos.  In my
case, I was fortunate enough to have the entire brake setup off a G60 with
only 28k miles when it was   rolled a couple of times.

Dale Witt
86 2.0 16v roc
82 2.1 16v roc (zender400 w/NOS)
85 1.8 GTI

----- Original Message -----
From: Eric L Ellis <elf16v@juno.com>
To: <scirocco-l@scirocco.org>
Sent: Saturday, June 10, 2000 11:46 PM
Subject: Re: Brake question


> Are we talking about the hub or the spindle? The hub merely fits into the
> bearing and the bearing rides in the spindle...or so I thought. I could
> understand "hub assembly: possibly.
>
> Eric
> Good, bad....I'm the guy with the gun!
>
>
> On Sat, 10 Jun 2000 20:26:52 -0600 "Owen" <mr.peepers@home.com> writes:
> > Yup, thats all you need, if you were to find the G60 hubs, then you
> > could
> > mount those, and you wouldn't need to get the brackets, but i think
> > its a
> > good way to go with just the brackets, unless you already know a
> > cheap
> > source for hubs.
> >
> >  HTH
> >
> > Owen
> > 87 Scirocco 2.0L 16v #38 C-Modified.
> > http://www.geocities.com/MotorCity/Garage/1571
> >
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org