[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brake question



When I went for the G60 setup about six months ago, I found that the hubs
off the G60 were much stronger than the Sciroccos and it was a good way to
end up with a first class  job.  I also changed out the master cylinder in
favor of the G60s.  There was much feed back at the time about unsprung
weight, etc, however, it is an excellent braking system.

Dale Witt
86 2.0 16v roc
82 2.1 16v roc (zender400 w/NOS)
85 1.8 GTI

----- Original Message -----
From: Owen <mr.peepers@home.com>
To: <scirocco-l@scirocco.org>; Tyler Zachau <zp1@uswest.net>
Sent: Saturday, June 10, 2000 9:26 PM
Subject: Re: Brake question


> Yup, thats all you need, if you were to find the G60 hubs, then you could
> mount those, and you wouldn't need to get the brackets, but i think its a
> good way to go with just the brackets, unless you already know a cheap
> source for hubs.
>
>  HTH
>
> Owen
> 87 Scirocco 2.0L 16v #38 C-Modified.
> http://www.geocities.com/MotorCity/Garage/1571
>
> > What do I need to go to 11" brakes? Will like G60 calipers, 11" discs,
and
> > the Momentum Motors brackets be enough, or do I need the G60 hubs as
well?
> > Thanks.
> > Tyler
> > 8816v "Arrest me red"
> >
> >
> > --
> > Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> > "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> >
> >
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org