Re: tranny's

["andkat" <andkat@foxinternet.net>]

The 020 AVX is from the ECO diesel 1.6.  The final drive is 4.25.  I was
told that I could put this into a AGB, but the diameter of the spline for
the fourth gear is about 3mm smaller than the pinion shaft off of the AGB.
The Bentley shows the AGB and the 2Y as having identical ratios even the
final drive.  There must be a difference between these two tranny's.  I'm
hoping that the AVX and the 2Y tranny's were built about the same time and
that they changed that spline diameter on both.  That is why I need to know
what YEARS these tranny's were in production.  Anyone?  Please?

                              Andy 1.9 '79

  Got to be done before the N.D.show
-----Original Message-----
From: Chris DeLong <green536@hotmail.com>
To: andkat@foxinternet.net <andkat@foxinternet.net>; scirocco-l@scirocco.org
<scirocco-l@scirocco.org>
Date: Thursday, February 24, 2000 1:03 AM
Subject: Re: tranny's


>
>
>>
>>Does anybody know the production dates for the following tranny's as well
>>as
>>the years they were used?     AVX,
>
>Never heard of this one.
>
>AGB,
>
>16V and has 100mm flanges
>
>2Y
>
>Same deal as above.
>
>
>>   I'm trying to put a AVX ring and pinion into a AGB but ran into a
little
>>problem.  Hopefully I can use a 2Y.
>
>It is all compatible. Just make sure you us the same ring gear and pinion
>shaft. They are machine matched. You cannot interchange ring gears and
>pinion shafts.
>
>
>HTH. And BTW what is a AVX tranny from?
>
>
>Chris DeLong
>ICQ#45030867
>Seattle, WA USA
>'80 16V Rag
>'80 Rocco (new!)
>'65 Bus (ugly, but good for campin' W/toaster oven)
>'82 GLI (now with a happy shaved, solenoid operated trunk)
>'80 'Vert
>'61 17 Window
>'78 Scirocco
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org