[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Euro light question





And I made a beautiful, detailed instructional manual on how to relay them, 
that you can find on scirocco.org. :)

Jason



At 04:10 PM 12/8/00 , you wrote:
>Dan Kraus wrote:
> >
> > I was wondering how hard it would be to install Euro lights in my 16V
> > Scirocco? What would I need to do the work and so on.
>
>    The S2 Euro light conversion is a stright over swap.  The only thing
>you will more than likely HAVE to do is to trim the US spec bumper strip
>so the lights will clear on the bottom (unless of course you have the S2
>Euro bumpers).  Some I have seen had to be trimed, others not.  Also,
>the pinout for the H4 is different than the pinout of the stock 4x6
>sealed beams, so that would need to be changed.  Also, the highbeam
>pinout is not like the sealed beam.  You may need to fab wires that run
>from the H1 bulb to the stock white plug (all depends on what comes with
>the S2 lights, new or used).  I would recommend relays tho, but not
>necessary.  HTH...
>
>  Andre'
>  Lime Green 79
>  ICQ #76283458
>  http://4.35.245.62
>  http://4.35.245.73
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
>"unsubscribe scirocco-l" in the message to majordomo@scirocco.org




----------
1987 Scirocco 16v
1988 Mercedes 190E Sport Euro


http://www.scirocco16v.org


--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org