[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Euro light question
Dan Kraus wrote:
>
> I was wondering how hard it would be to install Euro lights in my 16V
> Scirocco? What would I need to do the work and so on.
The S2 Euro light conversion is a stright over swap. The only thing
you will more than likely HAVE to do is to trim the US spec bumper strip
so the lights will clear on the bottom (unless of course you have the S2
Euro bumpers). Some I have seen had to be trimed, others not. Also,
the pinout for the H4 is different than the pinout of the stock 4x6
sealed beams, so that would need to be changed. Also, the highbeam
pinout is not like the sealed beam. You may need to fab wires that run
from the H1 bulb to the stock white plug (all depends on what comes with
the S2 lights, new or used). I would recommend relays tho, but not
necessary. HTH...
Andre'
Lime Green 79
ICQ #76283458
http://4.35.245.62
http://4.35.245.73
--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org