[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Starter shims

To: "scirocco-L@scirocco.org" <scirocco-L@scirocco.org>
Subject: Re: Starter shims
From: John Lagnese <jlagnese@cybertours.com>
Date: Fri, 18 Aug 2000 16:15:48 -0400
References: <399D954E.4BC1C77@cybertours.com>
Reply-To: jlagnese@cybertours.com
Sender: owner-scirocco-l@scirocco.org

Sorry, panic induced rushing. Pressure plate and clutch changed. Same
flywheel.

John Lagnese wrote:

> I replaced my pressure and clutch. When I go to turn it over it is
> turning over very slowly. Starter got very hot. Do I need to shim the
> starter becaudse of the different flywheel? Any other ideas? The engine
> turns over easily with a 3/8' ratchet.
> John
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- Starter shims
  - From: John Lagnese <jlagnese@cybertours.com>

Prev by Date: RE: digifant in MK1?
Next by Date: Re: digifant in MK1?
Prev by thread: Starter shims
Next by thread: Re: Starter shims
Index(es):
- Date
- Thread