RE: digifant in MK1?

["Brian Honnold" <bhonnold@pac-cap.com>]

It's not and afternoon job.

You have install the knock sensor, oxy sensor, idle stabilizer and digifant
brain and wire harness along with the digifant airbox, digifant fuel
rail/fuel pressure regulator/injector, and digifant injector seats and
rework your fuel system so that it runs from the pump to the fuel filter
directly to the FPR and then fabricate the return line to the tank.

Wiring up the brain is like 6-7 wires that need to go either to ground or to
the fuel pump relay circuit in the MkI.

For all that you get absoulty no benefit.  You can't chip it, you can't pass
smog with it if your in CA.  IMHO either look into CIS-E or Motronic which
are slightly easier but can be modified.  Also, make sure that your stock
CIS is running perfectly before deciding to swap.  On a 20+ year old car,
lots of wires and connectors get old and just make the system run like shit.

$.02

Brian H

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of chris
> Sent: Friday, August 18, 2000 12:53 PM
> To: scirocco-l@scirocco.org
> Subject: digifant in MK1?
>
>
> has anyone converted a cis to digifant in there mk1?
>  im trying to find out how much trouble it would be, anyone have
> any ideas?>
> chris
>
>
>
> ____________NetZero Free Internet Access and Email_________
> Download Now     http://www.netzero.net/download/index.html
> Request a CDROM  1-800-333-3633
> ___________________________________________________________
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org