[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 268's 16v



I think you will find the powerband a bit too  high. 
I have 256's now and wouldn't want anything bigger on
a 1.8.  Unless of course you live above 6000 rpm. 
Just my opinion.


--- SNixon5523@aol.com wrote:
> Has anyone put in a pair of 268's in a basically
> stock 16v?  I have a pair 
> sitting around for my 2.0L project, but the bottom
> end has gone to the back 
> burner for a while.  I need to replace my valve stem
> seals and figured since 
> I was going to be in there, I might as well do the
> cams also.  I figure I'll 
> need HD valve springs, right?  A power module and
> exhaust/TT race downpipe 
> are all I've done so far.  An adjustable cam gear is
> on the way.  Input 
> needed.
> 
> TIA,
> Stewart
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To
> unsubscibe send
> "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
> 


__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org