Re: OXY Sensor Mount

[T Berk <tberk@mindspring.com>]

At 02:36 PM 4/14/00 -0500, Christian Els wrote:
>  When I did
>finally get it to break loose via a violent application of torque, it did
>just that: broke loose. The part of the mount lug that had the threads cut
>into it stayed attached to the old sensor.
>
>I took an 18mm spark plug tap to the lug to re-cut the threads, but there
>just isn't enough metal left  to hold the new sensor securely. I have a
>"low-budget-high-flow" cat ;)  that I am not particularly interested in
>showing off to a shop to ask them to weld on a new boss, so instead I was
>wondering if any of you have had similar experiences that might lead me to a
>quick (cheap?) solution.
>
>Anyone?
>
>TIA


Techtonics sells a replacement part for you; I was thinking of having one 
melted on my early downpipe.

TBerk

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org