[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oxy. sensor



The Bosch connector on the O2 sensor is for heating it, the signal wire
is the black single wire with the rubber boot, that fits the male plug on
the harness, which is a green wire.

Peter 

On Mon, 18 Oct 1999 19:02:42 -0700 Tyler Zachau <Pennyz@ieway.com>
writes:
> On a 16v motor, which wire from the oxygen sensor is the signal wire 
> that I
> would want to tap into for a air/fuel gauge? Thanks.
> Tyler
> 
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org