[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Driveshaft Swap???



<x-flowed>If the cars in discussion are stock '84 scirocco and rabbit GTi respectively 
then they have the exact same axles. they should swap perfectly. The wheel 
bearing housings are identical (part #'s are the same) HTH


>From: NJNagel@aol.com
>To: scirocco-l@scirocco.org
>Subject: Re: Driveshaft Swap???
>Date: Sun, 28 Nov 1999 20:08:25 EST
>
>In a message dated 11/28/99 20:05:13 Eastern Standard Time, WaspHwy@aol.com
>writes:
>
> > is there any difference between the driveshafts on my 84 rocco wolfie or 
>my
> >  84 rabbit gti? any problems with swapping the rocco's onto the rabbit?
>
>yes.  your 'rocco should have 90mm cv's and the GTI has 100mm.   If you 
>want
>100mm CV's on your 'rocco you need to get 100mm output flanges for the 
>trans
>and I believe you may have to do some clearancing on the wheel bearing
>carriers as well.
>
>nate
>
>--
>Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
>"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V Rag
'65 Bus (ugly, but good for campin' W/toaster oven)
'82 GLI (with a severely mangled trunk lock thanks to the fucking thieves!)
'80 'Vert
'61 17 Window
'78 Scirocco


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-flowed>