Re: clutch problems?

[Shawn C Meze <skerocdriver@juno.com>]

On Fri, 12 Nov 1999 00:02:46 PST "Chris DeLong" <green536@hotmail.com>
writes:
>Use locktite, replace everything (including seals!),


Hey, dont stop there, gum it up with some red RTV for that extra dry
feeling! LOL!!


> replace the pushrod 
>bushing, don't replace the bolts (never had one break, but make sure 
>you get them tight enough!!!!). HTH and GL


Not only should you replace the little pushrod seal, replace the output
shaft seal too. Its not a written law that you have to replace the bolts,
but you should. You "should" replace the flywheel and the pressure plate
bolts. Like the headbolts, they're a stretch bolt meaning they're a one
time use only. 


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

________________________________________________________________
Get free e-mail you don't need Web access to use --
Or get full, reliable Internet access from Juno Web!
Download your free software today: http://dl.www.juno.com/dynoget/tagh.

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org