[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Plug Gaps



In a message dated 5/23/99 5:12:58 PM Pacific Daylight Time, corky@chumps.net 
writes:

> I just picked up some Bosch Platinums and I don't know what to set the Gap 
to.
> 

I believe that Bosch Platinums come pre-gapped, thus the gap designation on 
the end flap of the box.  Gapping a plug is a controversial subject.  In the 
"old days",  you  had to gap a plug.  Today many plugs are already gapped 
correctly and do not need any further adjustment.  If you do have to adjust 
the gap, some people will say that this will weaken the ground electrode(due 
to bending it) and that is not good.  If you have to gap it, I believe the 
correct gap is 0.028in (0.7mm).
GL.

-Dick-
78 Scirocco
Original Owner
<A HREF="http://member.aol.com/sailingfc/ ">http://member.aol.com/sailingfc/
</A> 

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org