Re:tie rod

[Gerry Reichelt <reichelt@telepath.com>]

At 14:30 03/12/99 -0500, Kurtis Daniels wrote:
>i would have to agree that the A arm could be bent. i slid into a curb @
>about 10 mph, and the wheel was definitely closer to the fender than it
>should have been. at first glance, the A arm didn't look bent. but when i
>looked harder, and compared it to the other side. i could tell that was the
>problem.
>   Put a straight edge to the bottom of the a-arm to check if it's true.
Gerry

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org