[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oxygen Sensor



Cut the wires off and try an impact wrench! Or heat it with acetelyne
(but don't put a hole in the cat/downpipe/manifold/header/whatever)!
	Good luck!
	-Josiah

On Sat, 05 Jun 1999 01:59:34 -0400 Christopher Grossi <cgrossi@dwc.edu>
writes:
>
>    Anyone ever have to change an O2 sensor that just won't budge? I
>have the socket and everything to do the job, I just can't get the
>stupid thing to come loose. Anyhone have any ideas? I have sprayed it
>with WD40 to try to lube it up, but it still won't move no matter how
>hard I tug on it....
>
>
>
>
>Chris
>
>
>
>--
>To unsubscribe, send "unsubscribe scirocco-l" to 
>majordomo@scirocco.org.
>If you experience other problems, email: 
>scirocco-l-probs@scirocco.org
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org