[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: extra fuel and rust



At 08:34 PM 12/31/98 -0700, matrix22 wrote:
>    Hi all!  I've been lurking for a while, just so busy this season.
>Anyway I have two questions, but first some background.
>    I have '81 with a 1.8l, no oxygen sensor, headers and larger in diameter
>than stock  made out of some non rusty material, I don't know if it's
>aluminum or stainless, I found it in the junk yard.  Air intake without the
>thermostat, k&n filter, Audi 5000 throttle body, and ported to match air
>intake manifold. So the whole air and exhaust flow is better.
<snip>
>    Also what's the best way to fix rust? Welding new metal, bondo? So that
>it would last long?  Thanks for the help
>
>Andy


Try this stuff-

Plasti-kote
Rust Not
Rust Converter

"Stops rust on contact and converts it to an iron hard, paintable surface."

Seems to work as advertised, I see that it will work as an undercoating for
bondo and/ or paint.

TBerk

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.