SV: turbo oil points

["Roland Johansson" <scirocco@mail.bip.net>]

The oil feeding the turbo you take from the side of the cylinder
head, either the oil switch or place a junktion there and have
both mounted.
Return oil you have to weld as high up on the oil pan as
possible because the oil level must be lower than the return
hole. The line should be thick, thicker than 13mm inside and no
places for oil to stand still in the line, must flow by itself
back to oilpan all times. 
The angle of the turbo oil in ->oil out to vertical must be less
than 15 degrees with must turbochargers.



Roland Johansson
Scirocco 1,6l TIC -82
Http://hem.passagen.se/toker


> Anyone know where is a good point to tap into the engine to
get oil to
> the turbo and a good point to let it flow back? I'm kinda
assuming that
> some high-pressure area like an oil pressure switch at the
head or
> something to get it to the turbo and maybe somewhere that will
just drop
> it back into the oil pan? Are my thinkings correct? : )
>     TIA,
>     Josiah



--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.