Re: OK, I'm going to do it!

["Alex Ting" <alex@millenniumsolutions.net>]

Hey George,

glad to see I'm not the only crazy one out there!
 
are the mounting points the same?
how much did your dash cost?
how soon are you doing yours?

Alex Ting
Millennium Solutions Group, Inc.
8303 Sierra College Blvd., Suite 150
Granite Bay, CA 95746

Phone: 888-801-2001 or 916-797-9998
Fax: 916-797-9997
Email: alex@millenniumsolutions.net



----------
> From: George Ciordas <georgec@iexcellence.com>
> To: Alex Ting <alex@millenniumsolutions.net>
> Subject: Re: OK, I'm going to do it!
> Date: Monday, August 10, 1998 1:53 PM
> 
> hey alex,
> 
> my corrado  dash ... g60  is going into my a1 rocco.
> 
> i 've seen it in a2 rocco's and it looks good... no gap between .. the
dash
> and shifter console
> 
> the switches are nicer on the vr6...but they have dials instead of
sliders
> for the ventilation controls and thats it more of a pain in the ass ..
for
> wire up...
> 
> not to mention ..you'll have to deal with the steering colum ...
> mount..(bracket) move it deeper in.. to clear... if you wanna do it right
> and make some mounts ...   and route all your ventilation hoses... if you
> want them to work...
> 
> later...
> 
> 
> george
> 
> 
> 
> >or, more accurately,
> >I'm going to TRY it.....
> >
> >Corrado dash into my '83 rocco.
> >Any physical difference between the G60 and
> >VR6 dash?  I'm assuming that if there is no physical
> >difference, it will be better to go with the G60 because
> >of the similar 4cyl calibration for the gauges (tach).
> >Any opinions?
> >Anybody have a spare dash? (yeah I know, just checking)
> >
> >TIA
> >
> >--
> >Alex Ting
> >Millennium Solutions, Inc.
> >8303 Sierra College Blvd.  Ste. 150
> >Granite Bay, CA  95746
> >
> >phone:(888) 801-2001 or (916) 797-9998
> >fax::     (916) 797-9997
> >email: alex@millenniumsolutions.net
> >--
> >To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
> >with your request (subscribe, unsubscribe) in the BODY of the message.
> 
> 
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------