RE: Removing 16v Injector

["Ryan Schuermann" <rts@phoenix.net>]

forget the tool! just lube the rings with something, gasoline, wd-40,
carb/choke cleaner etc, let em sit a bit, then just grab the metal pipe
where it bends (not the line) and pull back out, they should just pop 
right out.

Ryan

> At 06:25 AM 11/25/97 -0600, Shannon Fenton wrote:
> >Yes there is a special  tool for removing them, I will get the VW  part
> >number for you if you like but I believe  it should list it in the bentley.
> >My injectors  came out easy but that was because the O-rings  were bad. 
> 
> If the o-rings are "bad" then they actually become more of a bitch to
> remove. When they are new they are soft and pliable, therefore easier to
> remove. The $6.00 tool is available from Mark at Adirondack and makes the
> job a cinch regardless of how old the rings are. 
> 
> Last, there are 2 rings per injector. Might be a good idea to change all of
> 'em since you are in there.
> 
> Regards,
> Paul
> 
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
> with your request (subscribe, unsubscribe) in the BODY of the message.
> 
> 
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.