[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Air box to throttle body



Both of you are right,

but running it straight puts stress on:

-clutch cable
-master cylinder
-upper stress bar.

And eventually will pop out without warning you and letting all the 
bees, rocks, dog poop & the honda exhaust that is in front of you 
(eeerch).

But hey, I put it straight anyway :)

Frank

> At 11:43 PM 3/20/97 -0500, you wrote:
> >I found it just as easy and smoother running to use 2 45deg elbows 
> with a
> >331/2 deg in between. It also fit better and was less stressful on the 
> boots.
> >
> >Steve Toughill
> 
> 
> 
> Im confused. You removed the stock S tube and replaced it with another 
> 3" S tube?? I installed my 3" tube from the stock boot on the fuel 
> distributor and used a bend to connect straight to the throttle body. I 
> figure the less turns the better the airflow will be..... 
> 
> 
> 
> 
> Shawn
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
> with your request (subscribe, unsubscribe) in the BODY of the message.
> 
> ----------geoboundary--
> 
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.