[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: what's up with my trans???????



Does the push rod itself really need to be replaced?

>If you're going to do the clutch then do it right. Replace the throw out
>bearing, end cap, push rod, push rod bushing, push rod seal, trans mainshaft
>seal, engine main seal, pressure plate, clutch disc, release plate and clip.
>If you have an 8valve and a 5spd then you could even up grade the pressur
>plate to the 16valve one for a stronger grabbing clutch. The 16valve clutch
>disc won't work so don't even try that.
>While you have the trans out you could even drain it and put 2 quarts of
>redline MTL in it.
>
>Hope that helped.
>
>Steve Toughill
>NJScirGTX
>84 Scirocco GTX
>88 Fox
>

--------------------------------------------------------------------------
  Qui Le
  '90 Red G60 w/ Stage III
  '80 White Rabbit Convertible w/ 1.8L 8V
   www.earthlink.net/~radog60
--------------------------------------------------------------------------


--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.