Re:Temp Gauge Light

["eric c ragot" <eragot@tiny.brooklaw.edu>]

I had posted:
>	I'm having an interesting problem with my 1.8 8v. When I hit a 
>hard bump in the road, it must be a sharp bump that makes you wish you
could 
>avoid it - kinda like expansion joints, my temp light will flash for 3-8
>seconds. The temp is normal, and the sending unit is working (I 
>cleaned and disconnected to verify). I also checked and cleaned the
connection 
>for the cylinder head temp guage, it is clean and unbroken. None of the 
>wires from these two sending units is shorting out to the block.

I have taken steps to make sure that the fuel lines to the warm up
regulator are not able to touch the temp sender. It seems to have solved
the problem. 

Thanks for the advice.

-Eric R.
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.