what size is the nut holding the oil cooler on?

[smithma7 at gmail.com (Mike Smith)]

John,

I can't remember and Bentley doesn't want to tell me, but you do need
a specific o-ring on the top. At World Impex:
http://www.worldimpex.com/parts/genuine-part-oil-cooler-seal_42452.html

HTH,

Mike

On 9/22/07, John C. Worden <johncworden@xxxxxxxxxxx> wrote:
> Anyone know off the top of their head, what size the nut holding the oil
> cooler is?
> I bought a damned metric tape measure too and forgot all about while
> changing the
> oil.  It came loose at some point and seems to be the main cause for oil
> spots I leave
> everywhere I park.  Tightened it up with pliers and it's much better, but I
> should replace
> the seal on top of the cooler and then tighten it properly.  Is there a
> special seal or just
> use one from an oil filter?
>
>
>
> John C. Worden
> Bucksport, Maine
>
> ''98 Dakota 4x4-
> '88 Scirocco 16V-
> '86 Scirocco 8V-Now a 16V!
> '78 Scirocco Brazil Brown Metallic, 4 speed.- In the Rotisserie and under
> restoration
> '89 Polaris Indy Deluxe
>
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.5.5/769 - Release Date: 4/19/07 5:56 PM
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@xxxxxxxxxxxx
> http://neubayern.net/mailman/listinfo/scirocco-l
>


-- 
Mike
'86 Tred 16v: Red 5
'05 Iblue GTI 1.8T: Bib
"The world is my oyster soup kitchen floor wax museum." - King Crimson