Hatch Removal - wires disconnect

[amalventano1 at tds.net (Allyn)]

IIRC, the connectors are tucked into the body of the car.  Remove the boot from that end, then take up a little of the slack in the
wires.  You should see the plug.  This applies to both sides.  Be careful to not let them fall back in, or you'll be fishing them
out of the C-pillars.

HTH
Al

> -----Original Message-----
> From: Camron D. Crouse [mailto:camron@worldaccessnet.com] 
> Sent: Friday, January 26, 2007 6:10 PM
> To: Scirocco list
> Subject: Hatch Removal - wires disconnect
> 
> My 16V is in a state of disassembly for painting, but I'm 
> trying to get the rear hatch off.  Glass is removed. I have 
> access to the bolts under the headliner, but the wires for 
> defrost/plate lights are confounding me... the rubber boot is 
> in good shape, but there is no connector anywhere that I see 
> to make this job simple (when is it ever simple?). 
> Where/How do I disconnect the wires such that this can go 
> back together the best way ("best," of course, is up to your 
> interpretation...)  This question was once asked in the 
> archives, but there doesn't seem to be any replies.
> 
> 
> - Camron from Vancouver, WA USA
>    '86.5 Black 16V 2.0L Scirocco
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l